. XH1172 DSE USB ADSL Modem Installation Guide V1.0 – Last Updated on 27/10/04 by Leon Kok – © Copyright 2004- DSE (NZ) Ltd. Telecom's network services. DSE XH1172 USB ADSL Modem ADSL Router on Long Lines: This DSE XH1172 USB ADSL Modem may not achieve the type of “high speed” operation expected when attached to a line that is longer than intended by the ITU-T G992.1 ADSL standard i.e. XH1172 – DSE USB ADSL Modem – Installation Guide Contents INTRODUCTION.3.3 ACKAGE ONTENTS.3 INIMUM YSTEM EQUIREMENTS FEATURES & SPECIFICATIONS. 4 HARDWARE INSTALLATION.8 ADSL.8 AKE SURE SERVICE IS ACTIVATED.8 ONFIGURE YOUR PHONE EQUIPMENT 3.2.1.

1. Android Usb Drivers For Mac

1 Introduction Thank you for purchasing the DSE USB ADSL Modem. You will find that it is an excellent product that is easy to install and use. This USB ADSL Modem combines an “always on” high speed Asymmetric Digital Subscriber Line (ADSL) connection to the telephone line, and a Universal Serial Bus (USB) connection to a host PC into a complete and effective system. XH1172 – DSE USB ADSL Modem – Installation Guide 2 Features & Specifications Protocol and Device Driver Selection This USB ADSL Modem takes advantage of the processing power available with today’s computers by eliminating the need for a separate micro controller supporting the ATM Segmentation and Reassembly (SAR) function, resulting in a cost-effective ADSL solution suitable for both full-rate and G.lite applications. During periods of no data transmission, the device, and not the host software driver, performs idle cell insertion and deletion, thus unloading this task from the host PC and unburdening the USB bus with unnecessary traffic. The Convergence Sub layer performs message identification and clock recovery. Additionally, the CS of the AAL converts the user service information coming from the upper layer into a protocol data unit (PDU), and also carries out the opposite process at the receiver.

XH1172 – DSE USB ADSL Modem – Installation Guide LAN Mode Bridged or routed Ethernet over ATM (RFC 1483/2864) and Classical IP over ATM (RFC 1577/2225) are supported in the LAN driver. These protocols provide LLC or VCMUX encapsulation for carrying network inter-connect traffic over a single ATM AAL5 Virtual Connection. Telecom NZ supports them. If Telecom NZ decides to support a new protocol, we will endeavour to post the correct settings for the modem on our website Bus Type.

Android Usb Drivers For Mac

XH1172 – DSE USB ADSL Modem – Installation Guide 3 Hardware installation The following sections outline the steps you will need to take to install the DSE ADSL Modem. 3.1 Make sure ADSL service is activated Before you can use any ADSL modem, you must confirm the following:. However should an adaptor be required between the plug on the modem cord and the jackpoint, or you wish to connect telephone equipment to the same jackpoint, the DSE ADSL filter can be used by plugging the modem into the “ADSL” socket. XH1172 – DSE USB ADSL Modem – Installation Guide 3.3 Connecting the ADSL Modem to your PC The DSE USB ADSL modem is extremely easy to install. Please follow the two simple steps below to connect the modem to your PC. Windows XP and may differ slightly from what you see on-screen.

4.1 Windows Driver Installation Before connecting the XH1172 to the computer, insert the XH1172 driver CD that was included in the package into your CD-ROM drive, choose Install Windows Drivers from the Menu (if the menu does not appear automatically, go to My Computer and double click XH1172Drivers). XH1172 – DSE USB ADSL Modem – Installation Guide 4.

A dialog box will appear. Please ensure that Auto Installation is selected and then click Next Select the preferred country (New Zealand) and click Next. Select Telecom. Then click Next NOTE: Despite the title, this dialog is not referring to the ISP but the primary ADSL provider.

Enter the username and password assigned to you by your ISP. Please ensure you use the full username (i.e. XH1172 – DSE USB ADSL Modem – Installation Guide A summary screen will now appear. Click Finish to continue the installation.

After clicking Finish, you will see several windows appear and disappear from the screen, those screens should all be dealt with automatically, you do not need to click any of them – once this part of the installation is completed you will see a message box –. Restart button to continue. If no restart prompt appears, shutdown and restart using the normal means. Note: Drivers for Mac OS 9.1 are provided on the driver CD “as is” and DSE is only able to support Mac OS X. The Mac OS 9.1 drivers provided are NOT supported. 5.1 Accessing the configuration screens After your PC has rebooted, you can access the XH1172 configuration screens via a web browser (e.g. Internet Explorer, Mozilla, Opera etc).

Windows users can click the USB Endpoint Login on the desktop, otherwise use your web browser to go to default username is admin and password is password 5.2 Description of configuration options. Selection, and Bit Swapping.

Misc Configuration: Allows you to choose whether XH1172 configuration screens are accessible from the Internet (Disabled by default), also has options to limit Internet access to a specific IP address, Change the port which the integrated web server listens on, and choose whether to reconnect the PPP session when accessed form the Internet. Co p yr i gh t Copyright 2004 by DSE(NZ)Ltd - all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of DSE(NZ)Ltd. Support is provided for ADSL Modems, Routers, Filters and Sales Email: sales@orcon.net.nz all other hardware sold by Dick Smith Electronics only.

The Phone: 0508 564687 DSE national support centre operates Monday to Friday Support Email: support@orcon.net.nz during normal business hours. Phone: 0508 467266 Primary: 210.55.12.1. 8.2 Dick Smith Electronics Stores 14 John Street, Phone: (09) 438 0687, Fax: (09) 438 9635. Albany: Don McKinnon Drive, Albany MegaCentre, Phone: (09) 415 7410, Fax: (09) 415 4360; Glenfield: Glenfield Road, (Above Westfield Shopping Town), Phone: (09) 442 2314, Fax: (09) 442 2317; Takapuna: 451 Lake Road, Phone: (09) 486 4037, Fax: (09) 486 4039; City: 26-28 Wyndham Street, Phone: (09) 303 1355, Fax: (09) 303 2783.