1 SoftBank 101SI Upgrade tool for Windows PC Instruction Manual 1 2 Introduction Thank you for purchasing SoftBank 101SI and using upgrade tool. This upgrade tool is for 101SI firmware. Operating Environment WLAN Environment 101SI supports IEEE /n/g/n standards. Connect PC and 101SI for upgrading. Compatible Operating System Use upgrade tool in any of these operating environments. Windows XP Home Edition Service Pack2 or later Professional Service Pack2 or later Windows XP (64-bit) Windows Vista Home Basic (32-bit or 64-bit) Home Premium (32-bit or 64-bit) Business (32-bit or 64-bit) Ultimate (32-bit or 64-bit) Windows 7 Starter (32-bit) Home Premium (32-bit or 64-bit) Professional (32-bit or 64-bit) Ultimate (32-bit or 64-bit) Enterprise(32-bit or 64-bit) To upgrade.net Framework 2.0 or higher is required. If.Net Framework 2.0 or higher is not installed in PC.Net Framework 2.0 or higher has to be installed for normal execution.

Memory Requirement Windows XP 128MB (over 512MB recommended) Windows Vista 128MB (over 512MB recommended) Windows 7 128MB (over 512MB recommended) Available Hard Disk Capacity Over 20MB recommended 2 3 Recommended resolution Over 1024 x 768 recommended Notes Unauthorized copying of any part of this guide is prohibited. Contents are subject to change without prior notice.

Software Precautions You are only given the right to use the software. Such rights do not include copyrights, or the right to give or sell this software to any third party.

You are permitted to make copies of the software for backup purposes only. You are not permitted to make copies for distributing or selling to any third party. SOFTBANK MOBILE Corp. And its resellers take no responsibility for losses incurred by the user or any third party due to the use of the software. 3 4 Usage Conditions If Battery Strength is level 1 ( ), the upgrade is unavailable. Upgrade after charging Battery.

Don t power off 101SI and PC. And, don t disconnect the Wi-Fi connection. Before starting the upgrade, please make sure that 101SI and your PC are in the environment which enables them to connect to each other by WLAN connection. The upgrade tool cannot use USB Mode (101SI to PC via USB cable). Do not upgrade in the status of Note-PC battery operated. Please use the designated AC adapter of the Note-PC.

Upgrading takes several minutes. Then, PC doesn t become sleep-mode. When PC which becomes use is Windows XP, Microsoft.Net Framework 2.0 or higher must be installed in PC. If Microsoft.Net Framework isn t installed to PC, upgrade tool will display the message to install Microsoft.Net Framework. After installing Microsoft.Net Framework from Microsoft homepage, it is possible to use upgrade tool. Update tool doesn t depend on the administrator authority of the OS.

4 5 Trademarks SII logo are trademarks or registered trademarks of Seiko Instruments Inc. In Japan or other countries. Copyright Seiko Instruments Inc.

2012, All right reserved. SoftBank, SoftBank s equivalent in Japanese and SoftBank logo are registered trademarks or trademarks or trademarks of SOFTBANK CORP. In Japan and other countries. Microsoft, Windows, Internet Explorer, Windows Vista.Net are registered trademarks of Microsoft Corporation in the United States/other countries.

Microsoft Windows Operating System is indicated in its abbreviated from as Windows. The names of companies, products and services used in this document are registered trademarks or trademarks of the respective companies. 6 Upgrade tool Specification Setting Button Exit Button Status Display Button 101SI IP address setting. Initial value is The language setting. Exits the upgrade tool.

Update tool status appears. Connect / Update button Cannot operate during upgrade. AP Firmware and more than one firmware such as Modem Firmware are in 101SI. Upgrade tool can upgrade AP Firmware and Modem Firmware.

Language Setting The display language of the upgrade tool can be set. Click the Setting Button ( ), and select the Language tab. After that, select the language and click OK. Language English Japanese Description English setting Japanese setting 6 7 Status Notifications Display Wi-Fi 接続し Connect ボタンをクリックしてください Press Connect button to Connect with 101SI. Connecting with 101SI. AP: モデム: Update ボタンをクリックしてください ソフトウェアを更新します Connected AP: MDM: Press Update button to FW upgrade. ソフトウェア更新中数分お待ちください Updating Wait for a few minutes ソフトウェア更新完了 101SI を再起動します そのままお待ちください FW Update completed SI will be rebooted automatically.

この 101SI は すでにアップグレードされています The 101SI FW is same or higher version than current version. デバイスと 101SI の Wi-Fi 接続をご確認ください Please Check the WiFi Connection between your device and 101SI. バッテリー残量不足充電後 再度実施してください Battery Level Low Retry after charging ソフトウェア更新に失敗しました 再度実施してください Update failed. Try again Status It is a wait of the WLAN connection between the PC and 101SI. When WLAN is connected, click Connect button. Upgrade tool and 101SI are connecting.

The connection between upgrade tool and 101SI completed. Click the Upgrade button, and the upgrade process will start. 101SI upgrade is in progress. 101SI upgrade is completed.

The 101SI FW has already been upgraded. Exit the upgrade tool.

The upgrade failed because of the lack of connection between upgrade tool and 101SI. The upgrade process didn t succeed because 101SI s battery is low. Upgrade didn t succeed. 7 8 Upgrade Method The upgrade procedure of 101SI is described below. This document explains Windows7 to an example. As for the operating method, Windows XP, Windows Vista, too, become a similar procedure.

Upgrade Flow Upgrade tool download from SII homepage. Please confirm 101SI ソフトウェア使用許諾契約 and download the update tool. Connecting WLAN. Connecting 101SI and PC by WLAN. (About operation method, refer 101SI Quick Start or SoftBank 101SI User Guide.) Start Upgrade tool after download from SII homepage.

Connecting to 101SI by Upgrade tool. For more detailed information about the operation, please refer to Connecting to PC by WLAN (Page.9). Upgrade 101SI Firmware Click Connect button on Upgrade tool.

Upgrade will start. When upgrade was completed, the status display on upgrade tool becomes FW Update completed. After upgrade was completed, close Upgrade tool. After upgrade was completed, you may uninstall the upgrade tool from the PC. For more detailed information about the operation, please refer to 101SI Upgrade (Page.10). 9 Connecting to PC by WLAN 1 Connecting to PC by WLAN. About WLAN connecting method, please refer 101SI Quick Start or SoftBank 101SI User Guide.

2 Start Upgrade tool after download from SII home page. Upgrade tool is compressed in ZIP form. Please thaw the upgrade tool downloaded in arbitrary folders, such as a desktop. Click 3 Connecting to 101SI by Upgrade tool. Click Connect button ( ) on Upgrade tool. After that, status display shows Connecting with 101SI. Click When connected with 101SI, Status Display shows current 101SI firmware version.

If 101SI firmware is already upgraded, cannot upgrade. In this case, close upgrade tool by clicked Exit button ( ). If Please Check the Wifi Connection between your device and 101SI. Was showed in Status Display, WLAN connection may fail. Please check whether the PC and 101SI are connected by WLAN. If WLAN connection is completed, the IP address of 101SI may be different.

Click Setting button, and enter the old IP address. 9 10 101SI Upgrade 1 After 101SI completed to connect with WLAN on the upgrade tool, Click the upgrade button( ) and upgrade process will start. Click Updating is showed in Status Display during upgrade. Updating takes several minutes. Don t Power Off 101SI or PC, or don t remove a battery pack, it might affect the upgrade. 2 After upgrade was finished, FW Update completed. Is showed in Status Display.

Then close the Upgrade tool.( ) After that, 101SI is rebooted automatically. Don t power off until rebooting is completed. 101SI firmware version can be checked from Web UI after firmware upgrade. Enter URL (default) to PC browser, and login to Web UI. The default ID is user and Password is. 11 Troubleshooting Troubleshooting List No.

Symptoms Reference 1 Unable to connect to 101SI by WLAN connection. P.11 2 Unable to upgrade. P.12 How to Respond Unable to connect to 101SI by WLAN connection. 1 Make sure 101SI is properly connected to PC. 2 Was IP address of 101SI already changed? (default: ) If IP address of 101SI was changed, click the Setting button of Upgrade tool.

Click Enter IP address, and Click OK button. 11 12 Unable to upgrade. Already is the latest software, the display will show 'The 101SI FW is same or higher version than current version. In this case, the upgrade is unnecessary.

If Battery level is level 1, the following upgrades are unavailable. Upgrade after charging Battery. If Update failed. Try again was showed, upgrade once again.

Then, when upgrade fails again, restart 101SI and PC. Connect 101SI via WLAN, and upgrade once again. 12 13 SoftBank 101SI Upgrade tool for Windows PC Instruction Manual October 2012, First Edition Model Name: SoftBank 101SI Manufacture: Seiko Instruments Inc.

Is perhaps my new favorite Bluetooth speaker, and that’s saying a lot. It’s the right size – a little taller than a can of soda – and has a full, warm sound that can fill a room or your outdoor deck. With dual 8W drivers, two passive subwoofers, 10 hours of battery life and an IPX5 water rating, this speaker will go anywhere you want to bring it, be that the beach, your hotel room, or the kitchen of your AirBnB. It’s even got speakerphone capabilities as well as a USB port for charging your iPhone from the Voom 20s internal 5200mAh battery. It supports the aptX Bluetooth codec, so if you’re using this with your Mac you can get top-quality Bluetooth sound to it. One note: the volume control on the speaker is set independently of your device’s volume, so be sure to crank up both of them. With a special 25% discount available through August 8, the can be yours direct from VAVA for.

Softbank 101si Upgrade Tool For Mac Pro

That’s less than half of what I’ve found comparable speakers cost. Check out Apple’s new iPad Pro commercial, titled It’s like a Microsoft Surface Pro spot, with a prettier star, better lighting, better graphics, and better direction. It pitches iPad Pro as a computer, only one you can touch, type on, and write on using a stylus. It features iPad Pro (9.7-inch), Smart Keyboard, and Apple Pencil. It’s almost like Apple is saying this combination of devices is kind of like a toasterfridge that can do it all. I’d love to hear some thoughts from our readers on this. OmniFocus already encrypts your tasks database, but your files stored on the sync server were susceptible to hackers.

That changes with OmniFocus 2.6.1 for the Mac and 2.15 for the iPhone and iPad. The update ensures your OmniFocus files are securely encrypted when they’re at rest on the server, protecting you from nosey hackers interested in how you spend your day—which, it turns out, might include making sure OmniFocus is as secure as possible. OmniFocus 2 is priced starting at US$39.99 and is available on the. Tim DeBenedictis is the co-developer of the astronomy sky charting app SkySafari. He’s now the Director of Mobile Application Development at Simulation Curriculum Corp.

Tim was first inspired by the sky as a youth going on camping trips and being able to see the stars at night, something city dwellers seldom see. His dad was an avid bird watcher and always had a birding scope on the trips.

One night, they pointed the scope at Jupiter and its moons. Tim described it as captivating and launched his interest in amateur astronomy.

Later, that led to being a planetary science major at M.I.T. Where he developed an extensive C code base for celestial mechanics.

Years later, with that expertise, he co-developed SkySafari for the Mac, iOS and Android. Come take a grand celestial tour with us. 1:43 PM EST, Aug 1st, 2016. Is an excellent security convenience, allowing you to quickly unlock your iPhone or iPad without having to type in your Passcode. Most of us will want to train at least the index finger and thumb of both hands in order to have some unlocking flexibility.

That requires adding each fingerprint manually, and the iPhone only allows five total fingerprints to be trained. What if you want to train more than five fingers? Or what if you want to make the training process more efficient? In, listener Robin provided an answer to these questions: train multiple fingerprints simultaneously. 11:56 AM EST, Aug 1st, 2016. A video out of Vietnam claims to show Apple’s own Lighting to 3.5mm headphone jack adapter in action—the adapter that’s expected to ship with the iPhone 7 this fall. The new iPhone will reportedly ditch the familiar 3.5mm headphone jack in favor of audio over Lighting and audio over Bluetooth. Reports claim Apple will include a Lightning to 3.5mm adapter with the new iPhone model.

It’s hard to say if this video shows a legit Apple adapter, or something from a third party manufacturer. Regardless, the look seems very Apple, so maybe we really are getting a glimpse of what’ll be in the box when the iPhone 7 hits store shelves.