Fire-i™ Digital Board Camera is a board-level fully operational FireWire 400Mbps camera, complying with IIDC specification for industrial uncompressed VGA picture acquisition. Built around Texas Instruments 1394 digital camera chipset and Sony® Wfine CCD sensors, it is a high quality subassembly for OEM use. Fire-i™ Digital Board Camera offers:. 400Mbps 1394a, IIDC v1.04 DCAM spec. Compliance. Uncompressed VGA picture up to 30 fps. Square pixels, ¼” CCD.

Full frame electronic shutter with progressive scanning. On-board 6 pin 1394a port and power jack input 8-30V DC. Second 6 pin 1394a port on removable daughter board. Standard lens base M12x0.5 (lens not included). Small size and very low power consumption. Embedded hardware license for Unibrain’s Fire-i™ Software & SDK.

CE and FCC compliant Features. All models (Color, Black & White) of Unibrain’s Fire-i™ Digital Board Camera can be produced with the unique feature of a Remote CCD connected to the main board via a high reliability and density 6-inch flat cable. This is a new revision of the Fire-i™ board camera in which the daughterboard that hosts the second firewire port has been eliminated and instead the two firewire ports are now soldered on the main camera body. Lenses for Fire-i™ Digital Board Camera: Unibrain can provide you with the following lenses as standard products ( please consult us for special requests ): Focal Length (mm). Horizontal View Angle Aperture IR filter coating B/W Use Color Use Dimensions (mm) Weight (gr) Part No.

Powering the Camera Fire-i™ Digital Board Camera is powered by the FireWire bus DC voltage, coming from host adapters or other FireWire devices connected with 6-pin cables. Fire-i™ Digital Board Camera is provided with a DC power input jack connector, that can be used when the FireWire connection does not provide DC power. This happens typically:. when the FireWire bus is converted to a 4-pin connection. when, in 6-pin, no powering device is present, even from the FireWire interface. This is the case when using CardBus FireWire adapters or on some laptops with built-in interface. Even if the FireWire bus is already powered, the DC power input jack of the camera can also be used to reinforce it.

The FireWire bus voltage will adapt automatically when needed. A built-in diode avoid any risk of voltages conflict or reverse current flow. Recommended DC adapter must provide stable regulated output voltage of at least 12V DC,1A. To match camera DC input connector, the jack plug of the DC adapter need following dimensions and polarity as on the figure. Fire-i™ Digital Board Camera exists in 3 versions:.

Usb Webcam For Mac

Fire-i™ Color Digital Board Camera OEM, no lens: Part no.: 2056 (Sony color CCD, 400 TV lines). Fire-i™ B/W Digital Board Camera OEM, no lens: Part no.: 2057 (Sony monochrome CCD, increased resolution 480 TV-lines, increased sensitivity, close IR sensitivity). Fire-i™ RAW Color Digital Board Camera OEM, no lens: Part no.: 2060 (Sony color CCD, resol.480 TV-lines, streams like monochrome, color processing by user (software)).

Mac Firewire Port

Fire-i™ Color Digital Board Camera KIT, no lens: Part no.: 2040 (Includes board camera, 2m 1394a cable, CD with drivers and Fire-i camera control application). Fire-i™ B/W Digital Board Camera KIT, no lens: Part no.: 2050 (Includes board camera, 2m 1394a cable, CD with drivers and Fire-i camera control application). Fire-i™ RAW Color Digital Board Camera KIT, no lens: Part no.: 2059 (Includes board camera, 2m 1394a cable, CD with drivers with drivers and Fire-i camera control application). From here, you can download all technical documents that can help you in using Unibrain board cameras.